-
High Pressure Axial Oil PumpThe design dimensional tolerance control of all components far exceeds that of ordinary industrial hydraulic pump products.. The key components are all processed using ultra precision machining
-
Micro Oil PumpPiston type quantitative pump. Used for hydraulic open systems. Pump output flow rate is proportional to pump speed
-
High Temperature Oil PumpUnder general application conditions of Micro High Temperature Oil Pump, it is recommended to use ISO 6743-4 HM series hydraulic oil for hydraulic oil. Please consult the Micro Hydraulic Technology
-
Micro High Pressure Oil PumpAll key machined parts are made of imported high-strength stainless steel materials, with tensile strength grades far superior to ordinary industrial hydraulic pump products.. All seals are made of
-
Micro High Temperature Oil PumpUnder general application conditions of Micro High Temperature Oil Pump, it is recommended to use ISO 6743-4 HM series hydraulic oil for hydraulic oil. Please consult the Micro Hydraulic Technology
-
20mm Diameter Oil PumpWide operating speed range.. Fully immersed in oil, it can achieve self-lubricating and cooling.. The environmental pressure for pump applications can reach over 10Mpa.
The pumping speed, depending on the pump size, TRIVAC D 4 B to TRIVAC D 65 B, is in the range from 4 to 65 3 /h (2 to 38 cfm). Popularity 1 From 13 24 TRIVAC D 16 B 5 variants Pumping speed (50 Hz):...
Design principle TRIVAC B pumps use oil, injected into the pump chamber, for sealing, lubrication and cooling of the pump. The lubrication system is rated for continuous operation at high intake...
Mar 05, 2019 · Oil sealed rotary vane pumps (aka rotary vane pumps) are the primary pumps on most vacuum systems used in the heat treatment industry. They are also referred to as a "backing" pump...
Our range of oil-sealed pumps include screw vacuum pumps, rotary vane vacuum pumps and rotary piston vacuum pumps. ATEX options are available within the rotary vane range as required. Many of our...
Dec 08, 2016 · Rule 2: Warm up the pump with the inlet blocked. By running the pump for 20-30 minutes with the inlet blocked before connecting to your vacuum application, fewer vapors will condense...
The oil-sealed vacuum pumps are mostly used as a central vacuum system. The flow rate of the smallest EVS model is 426 m3/h, or 118 L/s. Therefore, it’s the best alternative to replace an existing...

