Drivers can be classified in many ways according to different standards. The following are common classification methods and their characteristics:
Classification based on control method:
Open-loop driver: There is no feedback link, and the motor movement is controlled only by the input signal. It has a simple structure and low cost, but the control accuracy is relatively low.
Closed-loop driver: The motor movement state is monitored in real time by the sensor, and the feedback signal is used to adjust the control algorithm to achieve higher control accuracy and stability. It is suitable for applications with high precision requirements.
Classification based on current control method:
Constant current driver: Maintains constant current output, suitable for applications that require stable torque.
Constant voltage driver: Maintains constant voltage output, suitable for applications that require fast response.
Classification based on voltage level:
Low-voltage driver: Suitable for low-voltage stepper motors, such as 12V or 24V.
High-voltage driver: Suitable for high-voltage stepper motors, such as 48V or higher.
Classification based on power level:
Low power drive: Suitable for small stepper motors such as NEMA 8, NEMA 11, etc.
Medium power drive: Suitable for medium-sized stepper motors such as NEMA 17, NEMA 23, etc.
High power drive: Suitable for large stepper motors such as NEMA 34, NEMA 42, etc.
Classification based on application area:
Industrial drive: Designed for high loads and harsh environments in industrial environments.
Medical drive: Designed for medical equipment that requires high precision and reliability.
Consumer electronics drive: Designed for consumer electronics such as printers, scanners, etc.
Classification based on motor type:
Permanent magnet stepper motor drive: Suitable for permanent magnet stepper motors with high efficiency and response speed.
Variable reluctance stepper motor drive: Suitable for variable reluctance stepper motors with large torque output.
Other classification methods:
Linear drive: used for applications that require high precision and high speed, such as CNC machine tools, robots, etc.
Microstep drive/subdivision drive: improves the smoothness and precision of the motor's movement by subdividing the step angle or microstepping technology, suitable for occasions where fine motion control is required.
Bipolar drive: can control both windings of the motor at the same time, suitable for applications that require large torque output.
Unipolar drive: only controls one winding, has a simple structure, low cost, and is suitable for occasions where torque requirements are not high.

